Specialty Graphite---Isostatically Molded Graphite (IMG series)
IMG series graphite materials are produced by the method of Cold Isostatic Pressing (CIP). The CIP method involves transmitting a pressure with a liquid; in other words, it is a method of applying Pascal¨s law to powder molding. When powder is scaled in a rubber bag that has little transformation resistance and liquid pressure is applied. All of the powder surfaces receive the same compressive force equal to the liquid pressure so that the powder is compressed and molded isotropically. Our IMG series graphite materials with this method can be obtained especially fine grain, dense and uniform structure. This series graphite materials have many good characteristics such as high strength, excellent thermal shock resistance to high temperature and oxidation, low specific electric resistance, good anticorrosion, ease of precise machining, low impurities, and also have the merits of large size and good isotropy.
Typical Grades/Properties
Grades |
Bulk
Density
|
Specific Resistance |
Flexural Strength |
Compressive Strength |
C.T.E. |
Porosity |
Ash Content |
Grain Size |
Elastic Modulus |
Shore Hardness |
|
|
μΩ.m |
MPa |
MPa |
|
% |
ppm |
μm |
Gpa |
- |
BGWI-IMG 01 |
1.85 |
115 |
12 |
41 |
80 |
4.5 |
15 |
500 |
25 |
11.6 |
56 |
BGWI-IMG 02 |
1.80 |
113 |
12 |
38 |
75 |
4.5 |
18 |
500 |
25 |
10.0 |
50 |
BGWI-IMG 03 |
1.80 |
113 |
13 |
41 |
80 |
4.6 |
18 |
1000 |
21 |
11.5 |
60 |
BGWI-IMG 04 |
1.75 |
109 |
13 |
35 |
71 |
4.0 |
20 |
1000 |
22 |
10.5 |
55 |
BGWI-IMG 05 |
1.70 |
106 |
13 |
28 |
56 |
3.2 |
20 |
700 |
22 |
9.5 |
50 |
BGWI-IMG 06 |
1.70 |
106 |
13 |
23 |
46 |
3.8 |
20 |
700 |
25 |
9.5 |
45 |
BGWI-IMG 07 |
1.65 |
103 |
14 |
16 |
32 |
3.0 |
25 |
1000 |
25 |
9.0 |
40 |
| NOTE: |
， Other grades are provided as per your requirements
， The above graphite can be further purified on your request
， These properties present typical average values only and are intended to provide general description
of our products and their applications. It should not be construed as guaranteeing specific values
or grades suitability for a particular application.
， C.T.E. = Coefficient of Thermal Expansion, and measured to 100 .
， Graphite Rounds, Graphite Blocks are available. Each grade material can be offered machined to
your specifications. |
Typical Applications
， CZ Silicon Crystal Growth
， Continuous Casting Dies
， EDM
， Hot Pressing Dies and Molds
， Mold Cores
， Permanent Molds
， Plunger and Rams
， Quartz Processing
， Electronic and Aerospace Fixtures
， Composite Tooling
Please contact us for more information, and we would be welcome the opportunity in supporting you with these projects.
|
